# vxdiskadm
Volume Manager Support Operations
Menu: VolumeManager/Disk
1 Add or initialize one or more disks
2 Encapsulate one or more disks
3 Remove a disk
4 Remove a disk for replacement
5 Replace a failed or removed disk
6 Mirror volumes on a disk
7 Move volumes from a disk
8 Enable access to (import) a disk group
9 Remove access to (deport) a disk group
10 Enable (online) a disk device
11 Disable (offline) a disk device
12 Mark a disk as a spare for a disk group
13 Turn off the spare flag on a disk
14 Unrelocate subdisks back to a disk
15 Exclude a disk from hot-relocation use
16 Make a disk available for hot-relocation use
17 Prevent multipathing/Suppress devices from VxVM's view
18 Allow multipathing/Unsuppress devices from VxVM's view
19 List currently suppressed/non-multipathed devices
20 Change the disk naming scheme
21 Get the newly connected/zoned disks in VxVM view
22 Change/Display the default disk layouts
23 Mark a disk as allocator-reserved for a disk group
24 Turn off the allocator-reserved flag on a disk
list List disk information
? Display help about menu
?? Display help about the menuing system
q Exit from menus
Select an operation to perform: 1
Add or initialize disks
Menu: VolumeManager/Disk/AddDisks
Use this operation to add one or more disks to a disk group. You can
add the selected disks to an existing disk group or to a new disk group
that will be created as a part of the operation. The selected disks may
also be added to a disk group as spares. Or they may be added as
nohotuses to be excluded from hot-relocation use. The selected
disks may also be initialized without adding them to a disk group
leaving the disks available for use as replacement disks.
More than one disk or pattern may be entered at the prompt. Here are
some disk selection examples:
all: all disks
c3 c4t2: all disks on both controller 3 and controller 4, target 2
c3t4d2: a single disk (in the c#t#d# naming scheme)
xyz_0 : a single disk (in the enclosure based naming scheme)
xyz_ : all disks on the enclosure whose name is xyz
Select disk devices to add: [<pattern-list>,all,list,q,?] list
DEVICE DISK GROUP STATUS
c0t0d0 - - online invalid
c0t1d0 - - online invalid
c2t0d2 - - online
Select disk devices to add: [<pattern-list>,all,list,q,?] c2t0d2
Here is the disk selected. Output format: [Device_Name]
c2t0d2
Continue operation? [y,n,q,?] (default: y)
You can choose to add this disk to an existing disk group, a
new disk group, or leave the disk available for use by future
add or replacement operations. To create a new disk group,
select a disk group name that does not yet exist. To leave
the disk available for future use, specify a disk group name
of "none".
Which disk group [<group>,none,list,q,?] (default: 9iRac) oradg
There is no active disk group named oradg.
Create a new group named oradg? [y,n,q,?] (default: y)
Create the disk group as a CDS disk group? [y,n,q,?] (default: y)
Use a default disk name for the disk? [y,n,q,?] (default: y)
Add disk as a spare disk for oradg? [y,n,q,?] (default: n)
Exclude disk from hot-relocation use? [y,n,q,?] (default: n)
A new disk group will be created named oradg and the selected disks
will be added to the disk group with default disk names.
c2t0d2
Continue with operation? [y,n,q,?] (default: y)
The following disk device appears to have been initialized already.
The disk is currently available as a replacement disk.
Output format: [Device_Name]
c2t0d2
Use this device? [y,n,q,?] (default: y)
The following disk you selected for use appears to already have
been initialized for the Volume Manager. If you are certain the
disk has already been initialized for the Volume Manager, then you
do not need to reinitialize the disk device.
Output format: [Device_Name]
c2t0d2
Reinitialize this device? [y,n,q,?] (default: y)
Initializing device c2t0d2.
Enter desired private region length
[<privlen>,q,?] (default: 2048)
VxVM NOTICE V-5-2-120
Creating a new disk group named oradg containing the disk
device c2t0d2 with the name oradg01.
Add or initialize other disks? [y,n,q,?] (default: n)
Volume Manager Support Operations
Menu: VolumeManager/Disk
1 Add or initialize one or more disks
2 Encapsulate one or more disks
3 Remove a disk
4 Remove a disk for replacement
5 Replace a failed or removed disk
6 Mirror volumes on a disk
7 Move volumes from a disk
8 Enable access to (import) a disk group
9 Remove access to (deport) a disk group
10 Enable (online) a disk device
11 Disable (offline) a disk device
12 Mark a disk as a spare for a disk group
13 Turn off the spare flag on a disk
14 Unrelocate subdisks back to a disk
15 Exclude a disk from hot-relocation use
16 Make a disk available for hot-relocation use
17 Prevent multipathing/Suppress devices from VxVM's view
18 Allow multipathing/Unsuppress devices from VxVM's view
19 List currently suppressed/non-multipathed devices
20 Change the disk naming scheme
21 Get the newly connected/zoned disks in VxVM view
22 Change/Display the default disk layouts
23 Mark a disk as allocator-reserved for a disk group
24 Turn off the allocator-reserved flag on a disk
list List disk information
? Display help about menu
?? Display help about the menuing system
q Exit from menus
Select an operation to perform: q
Goodbye.
</privlen></group></pattern-list></pattern-list>
相关推荐
vcs中文使用教程,帮助你快速入门Linux下的VCS操作
VCS使用中文教程
介绍了VCS怎么使用PLI,非常不错的资料哦
Windows平台仅使用本地磁盘创建赛门铁克VCS集群的配置方法
VCS简明使用教程:编译,仿真,调试,覆覆盖率分析...等
vcs使用手册vcs使用手册vcs使用手册vcs使用手册
介绍了关于vcs软件仿真使用方法,作为经典指南,是硬件开发人员必备良器。
验证与VCS使用,在做IC验证时使用VCS,让你更轻松地完成验证
验证与vcs使用
VCS使用中文教程,vcs怎么使用,LINUX源码.zip
VCS使用中文教程,vcs怎么使用,LINUX源码.rar
VCS 使用入门,中文资料,没那么难,可以很轻松地学会用VCS做验证
使用vcs配合vivado进行仿真
VCS DVE入门手册,中文汉化版指导手册,适合入门初学者使用,
我先说说我的遭遇吧,我出差在珠海时项目组一直用这个工具,经常会两个人修改同一个包或存储过程,难免会一个人保存了把领一个人的代码冲掉了,所以习惯是修改前每个人问一遍这个包在使用么?没用我要告诉大家我在用...
vcs命令
很好的教材!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
VCS试用例子,,中文VCS试用例子,,中文VCS试用例子,,中文